DIY scarf bolero with do-it-yourself clasp

Send

Multicolor, exotic, luxurious - drawings on the fabrics of the countries of the Far East look excellent everywhere - including clothing and accessories.

COOL WIND
A fan made of a piece of silk fabric and chopsticks is a very relevant accessory for a hot summer. You will find the pattern at the top.

WHAT YOU NEED: remnants of fabric with oriental pattern size. OK. 50 x 50 cm; Haftvlies Vliesofix gasket 15 chopsticks; 15 wooden beads diam. 8 mm; wire; wood glue; drill with wood drills; sewing threads; silk paper; "magic" crayon, burda carbon paper.
HOW TO MAKE:
Copy the detail, for which fold the silk paper in half and put a fold in the middle of the pattern. The detail is cut and laid out in one layer. To iron the flizofix separately copy the area marked in gray. Cut out 2 fan parts from the fabric, along the side cuts with allowances of 7 mm wide, cut the upper and lower cuts without allowances. The dashed lines of the stitching should be transferred to the wrong side of one of the fabric parts, then transferred to the front side with sewn stitches.
From the flizofix fix out 14 parts (without allowances) and iron between marked lines of stitches on the wrong side of one part of the fan. Remove paper. Fold fan parts face to face, grind side sections.Unscrew the fan, do not iron (!). The details of the fan are chipped inside out to the inside, the seams lie exactly inside the side bends. Stitch fan parts along marked lines. Now iron the fan, the sections between the lines of the lines are “glued together” thanks to the flizofix.
Fold the fan in the middle between the lines of the lines (along the dashed lines) and iron it. Sharpen the upper ends of chopsticks (using a pencil sharpener). If necessary, increase the holes in the wooden beads with a drill. About 1 cm above the lower ends of the sticks, drill small holes for threading the wire. Insert the sticks from the bottom into the drawstring holes between the stitches. Lubricate the pointed ends of the sticks with wood glue. Then grease the inside with glue and string wooden beads. Lay the lower ends of the sticks next to each other, pass the wire through the holes, on the side sticks, wrap the wire around it and alternately pass over and under the sticks to the middle stick. Twist the ends of the wire several times.

MIXING STYLES
Geisha on a dance ball? The usual thing! In such a baseball cap, the attention of those around her is guaranteed!
WHAT YOU NEED: baseball cap; patches of various fabrics with an oriental pattern; Vlieseline G 785 gasket; 1 button diam. OK. 2 cm; sewing threads; silk paper; textile glue.
HOW TO MAKE:
Copy the outline of the visor and the front of the cap onto silk paper. Strengthen the flaps of tissues from the wrong side with non-woven fabric. Cut out the visor 2x with allowances of 1 cm. Cut the front part of the cap 1x with allowances of 1 cm.
On the visor details, iron the seam allowance along the cutting edge onto the wrong side and stitch it to the edge. Fold the visor details face to face, grind along the side and front sections. Cut allowances close to the line. Unscrew the visor detail and pull the baseball cap on the visor. Glue the upper edge, sew the upper edge of the visor to the inner edge of the cap from the inside.
From a rag of fabric to cut out a rectangle of the size. 7 x 8.5 cm. Paste the rectangle under the tucks with the wrong side over the face on the cut out front part of the cap. Sew on the edges with a dense zigzag 5 mm wide. Then grind the tucks, iron the depth of the tucks on one side. Iron allowances all the way around.
Put the front part of the cap on the face on the corresponding part of the baseball cap, sew the edges manually.
Tighten the button with a cloth, for which a circle is cut (1.5 cm larger at all edges than the button). To circle a circle at a distance of 5 mm from a cut with the help of small stitches "forward a needle". Put the button on the seamy side of the circle, tighten the thread of the thread and sew it up. Sew a button to a baseball cap.

EXCELLENT IN ALL RELATIONS
A scarf-bolero with a clasp-brake - for its manufacture you need only a flap of silk.
YOU WILL NEED
Silk fabric with oriental pattern size. OK. 125 x 50 cm; 1 gantry clasp-brake; 1 button; threads for sewing.
STEP 1
Fold the fabric face to face, grind along all sections, leave a hole in the seam for turning out. Cut corners close to the stitch, unscrew the scarf, sew the hole in the seam manually.
STEP 2
Make 2 marks: on the left - at a distance of 3 cm from the outer end and 0.5 cm from the top edge; on the right - at a distance of 4 cm from the outer end and 4 cm from the upper corner. Tags chopped off.
STEP 3
Fix the corners of the bolero scarf with a few stitches manually. Sew on the girth bracelet and button.